Engineered hardwood flooring is a product made up of a core of hardwood, plywood or HDF and a top layer of hardwood veneer that is glued on the top surface of the core and is available in almost any hardwood species. The product thus has the natural characteristics of the selected wood species as opposed to a photographic layer. The engineered product has been designed to provide greater stability, particularly where moisture or heat pose problems for solid hardwood floors.
27
What is the difference between a laminate, solid hardwood and an engineered hardwood floor
2007-12-20 9:37:09
Answer
Laminate- core of product is typically made of High Density Fiber (HDF). The top layer is a photographic layer that should appear identical to the product it replicates, be it wood, vinyl, tile, etc. The product is generally 3/8 thick and is a floating install with tongue and groove glue less locking system which allows you to install and uninstall the floor several times if desired. This product is typically the least expensive. Solid Hardwood- the product is the solid natural wood species throughout the entire piece of flooring, typically with a tongue and groove installation. Good sanding and refinishing capabilities. The product is typically more expensive and has some limitations as to where it can be installed due to moisture issues.
28
What does greater stability mean?
2007-12-20 9:37:39
Answer
The instability of solid hardwood is usually moisture or heat related. Under adverse conditions, solid hardwood floors can warp, cup, swell or split apart. Engineered hardwood flooring overcomes these problems by constructing a multiple-ply plank which counteracts twisting and remains flat and intact. This makes engineered hardwood flooring a better choice for installation over radiant heat sources, over concrete whether it''s below grade or above, and in rainy climates.
29
How many layers does engineered flooring have?
2007-12-20 9:38:11
Answer
In addition to the top hardwood veneer, engineered wood flooring typically has three or more core layers. Of course, there is greater stability with more layers. The core layers may be plywood, high density fiberboard, or hardwood. For example, Vanier engineered flooring has five to seven hardwood core layers.
30
Does engineering destroy the natural beauty of hardwood floors?
2007-12-20 9:38:37
Answer
Not at all. The top hardwood layer is the same genuine hardwood you have in solid hardwood floors. This show veneer is available in most species of natural hardwood.
31
What is the thickness of the hardwood veneer?
2007-12-20 9:39:11
Answer
The hardwood veneer, or top layer of hardwood, can typically be 0.6mm to 4.5mm or more in thickness. A quality hardwood veneer will provide many years of wear. For example, Vanier engineered hardwood flooring has a select and Better 2mm hardwood veneer and comes with a 25-year finish warranty.
32
Can I refinish an engineered floor?
2007-12-20 9:39:44
Answer
It depends upon the thickness of your hardwood layer but the fact is that 95 % of hardwood surfaces are never refinished. With the high quality finishes that are offered and the extensive process that refinishing a floor entails, damaged areas are often removed professionally. If sanding is desired, typically, the professional sanding procedure removes 1/32 of an inch. Thus if your floor has a 2mm layer you can sand the floor 1-2 times.
33
Besides different species, what else accounts for the different appearances in hardwoods?
2007-12-20 9:40:17
Answer
Hardwood veneers have the same surface appearances as solid hardwood flooring because they''re both natural hardwoods. Different appearances result from the different ways the hardwood are sawn. The different sawing methods are: i) Flat Sawn or Plain Sawn, ii) Rotary Cut, iii) Off-Set Rotary Cut, and iv) Sliced Cut.
Flat Sawn (also referred to as plain sawn) - can be flat grain (which has a cathedral or gothic effect) or vertical grain (which has a radial or edge grain effect).
Rotary Cut – method of cutting wood in which the hardwood layer is peeled off the log using large wood lathes. This peeling method shows dramatic, wilder graining.
Off-Set Rotary Cut – method of cutting wood which gives a sliced appearance and grain pattern with the added cross grain stability of sliced, without the sliced cost. Hardwoods are more dimensionally stable across the grain, and off-set rotary cutting takes advantage of this property. The yield is lower than a regular rotary cut creating a slight price increase vs. standard rotary.
Sliced Cut – method of cutting wood in which the hardwood layer is sawn like regular lumber. This shows method finer graining.
34
Is there a benchmark for comparing the relative hardness of other wood?
2007-12-20 9:40:53
Answer
Red Oak is a very popular, durable species. It has a Janka rating of 1290 and serves as a benchmark for comparing the relative hardness of other wood species.
35
Is the Janka rating useful for engineered hardwood flooring?
2007-12-20 9:41:49
Answer
The Janka rating is a good one to keep in mind for engineered hardwood flooring as well as solid hardwood, especially if durability is a key selling feature for you. The Janka hardness rating of the hardwood used for the veneer on your engineered flooring will guide you to the best choice for your intended flooring use. Vanier Hard Maple, Brazilian Cherry and Hand-scraped Oak, Red Oak, and Black-Stained White Oak are all excellent engineered floors for high traffic areas.
36
How many times can you sand a floor?
2007-12-20 9:42:25
Answer
As per the NOFMA calculations, the sanding operation should remove no more than 1/32. You should thus be able to sand a 1/16 hardwood layer on an engineered floor 1-2 times if correctly done. It is not recommended to sand a 1/32 thick hardwood layer.Solid wood floors can only be sanded to 1/32 above the tongue to maintain the stability of the tongue and groove joint.
37
In preparing a sub floor, what is the maximum variance you should allow?
2007-12-20 9:42:49
Answer
The preparation of your sub floor is a key factor to the final outcome of your floor. You should have no more than ¼ over 8'' variance on your sub floor.
38
Am I restricted to just one product in a container?
2007-12-20 9:43:17
Answer
This depends on which product lines you are specifically interested in. Call BuildDirect for more information.
39
Do I have to be a contractor to buy from BuildDirect?
2007-12-20 9:43:40
Answer
No. Anyone who meets the minimum order requirement can buy from BuildDirect. This means that whether you are a distributor, retailer, or a homeowner with a big project, you can take advantage of the great pricing that BuildDirect offers.
40
Do you offer any further discounts for trades people?
2007-12-20 9:46:07
Answer
All pricing for BuildDirect''s materials are discounted as much as possible for everyone, regardless of whether or not they are industry professionals. The low markups for engineered hardwood floors offered by BuildDirect is still the best possible pricing you''ll find anywhere.
41
How do I obtain flooring samples?
2007-12-20 9:46:37
Answer
For samples we only charge for the courier cost of the samples which can be ordered Fedex ground or Fedex Expedited. The rate will be calculated based on your address and the number of samples you order. Samples can be ordered online or over the phone at
1-877-631-2845 . Payment can be made by MasterCard or Visa.
42
Can you tell me an exact date a container will arrive?
2007-12-20 9:47:08
Answer
Unfortunately, we cannot offer guarantees on container shipment timelines. At this time, most containers take 8-10 weeks from time payment is received. There is a chance that it may take longer because of factors beyond our control. For example, security measures undertaken by U.S. Customs and Border Protection could possibly delay shipment.
43
How are residential deliveries made?
2007-12-20 9:47:49
Answer
The product would be delivered on a truck equipped with a lift-gate. The pallets would be lowered to the ground and pulled onto your driveway with a pallet-jack. A residential delivery is considered completed once the product is placed on the driveway. Building materials are heavy and will require proper equipment or labour to accept goods on delivery. Please check the weight of your goods before they are delivered so that you are properly prepared
